China Forged Industry Steel Forging Chain and Scraper Forged Drag Steel Chain Standard Carbon Steel Chain with Machinery Parts and Conveyor Roller Bush double chain

Solution Description

About Factory 

With more than 18 years’ histiory, we are a professinal producer for drop cast products this kind of as cast chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth normal moulds of chain. 

In addition to, we can also generate as per your drawing or sample, specific link chain, pusher, pin and plate, in accordance to customers’ unique needs.

Item Description

1) Materials: Alloy steel, 40Cr, 42CrMo and so on.
2) Kinds: Standard kinds, X348 X458 X678, and so on. (Or as for every your drawing)
3) Procedure: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Packing

Merchandise Show
 

Specialized Information
 

Model Dimension Excess weight (Kg) Material Hardness Functioning Load (KN) Limit Load (KN)
P T C S F R D
10160B 101.six 24 36 13 fourteen six 14 .32 20CrMnTi Surface area HRC56-64°    
Depth .6-1.2mm
18 100
10160 one hundred and one.six thirty 36 13 fourteen.five nine 14 .36 20CrMnTi Surface HRC56-64°     Depth .6-1.2mm 21.6 120
14218 142 forty two 50 19 20.5 11 25 1.15 20CrMnTi Area HRC56-64°     Depth .6-1.2mm 48.six 270
14226 142 sixty two 50 28 30 15 twenty five 1.seventy five 20CrMnTi Floor HRC56-64°     Depth .6-1.2mm 61.2 340
2571 200 sixty six 60 thirty 32 18 thirty two.eight 20CrMnTi Area HRC56-64°     Depth .6-1.2mm 72 400
26014 260 70 seventy five 31 33 20 34 5.2 20CrMnTi Surface HRC56-64°     Depth .6-1.2mm a hundred thirty five 750
142N 142 43 50 19 22 twelve.five twenty five 1.two 40Cr Quench HRC36-44° 75.6 420
150D 142 forty two 50 19 twenty.5 eleven 25 one.fifteen 40Cr Quench HRC36-44° 75.six 420
MG20 200 70 50 27 29 seventeen 35 3.seventy eight 40Cr Quench HRC36-44° one hundred forty four 800
MG20B 200 70 fifty 27 29 17 30 3.82 40Cr Quench HRC36-44° a hundred and forty.four 780
MG20C two hundred 70 fifty 27 29 seventeen 28 three.85 40Cr Quench HRC36-44° 122.4 680
MS32 two hundred forty two fifty 20 22 twelve 25 one.4 40Cr Quench HRC36-44° 75.six 420
MS55 200 80 70 35 38 25 28 four.36 40Cr Quench HRC36-44° 138.6 770
3006 two hundred sixty five 70 thirty 33 24 32 three.6 40Cr Quench HRC36-44° 160.2 890
MS63 250 70 80 30 33 twenty 32 4.93 40Cr Quench HRC36-44° 147.six 820
S16 one hundred thirty 27 15 16 eight 14 .3 40Cr Quench HRC36-44° sixteen 88
S20 a hundred twenty five 34 33 17 18 eight 17 .37 40Cr Quench HRC36-44° 19.four 108
S25 160 48 39 23 25 13 20 1.28 40Cr Quench HRC36-44° 55.eight 310
S30 142 46 forty nine 22 23.5 fourteen twenty five one.3 40Cr Quench HRC36-44° 91.8 510
Z16 100 forty 35 eighteen twenty 12 17 .4 40Cr Quench HRC36-44° 32.four 180
Z20 one hundred twenty five 50 forty six 24 26 15 20 .sixty seven 40Cr Quench HRC36-44° fifty nine.4 330
Z20D one hundred twenty five fifty two 60 24 26 16 26 one.fifteen 40Cr Quench HRC36-44° 82.8 460
Z25 a hundred and sixty 58 fifty five 28 thirty 18 25 2.twenty five 40Cr Quench HRC36-44° 82.eight 460
Z25D a hundred and sixty sixty six 64 29 31 22 28 two.6 40Cr Quench HRC36-44° a hundred and twenty.6 670
Z30 142 sixty four 50 29 30.5 18 twenty five 1.8 40Cr Quench HRC36-44° 111.6 620

Goods & Testing Equipments
 

Products Application


Packing & Supply
 

Why Pick Us?

one. We are engaged in chain business in excess of fifteen a long time with prosperous marketplace knowledge. We preserve enhancing production strategies. All the products have more time functioning existence and have handed the industry test.

2. We can design and style the appropriate chains with higher good quality material, excellent abrasion resistance, very good corrosion, higher reinforce and and so forth as per your request or the chain application.

3. We are the chain company you can directly acquire the solution from us with low price and higher quality.

four. We have a skilled staff for worldwide trade, they have ample encounters and are always all set to fix difficulties for consumers. So you have nothing at all to worry about.

five. We have the long-expression cooperative forwarder who can give us the lowest freight. And it can aid you to save the freight. What is more, for the FCL, we will layout the deals as for every the container dimensions with the largest capacity to save the transport value for both of us.

 

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly
Surface Treatment: Polishing
Structure: Combined Chain
Material: Alloy
Type: Cranked Link Chain

###

Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Dimension Weight (Kg) Material Hardness Working Load (KN) Limit Load (KN)
P T C S F R D
10160B 101.6 24 36 13 14 6 14 0.32 20CrMnTi Surface HRC56-64°    
Depth 0.6-1.2mm
18 100
10160 101.6 30 36 13 14.5 9 14 0.36 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 21.6 120
14218 142 42 50 19 20.5 11 25 1.15 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 48.6 270
14226 142 62 50 28 30 15 25 1.75 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 61.2 340
20028 200 66 60 30 32 18 30 2.8 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 72 400
26014 260 70 75 31 33 20 34 5.2 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 135 750
142N 142 43 50 19 22 12.5 25 1.2 40Cr Quench HRC36-44° 75.6 420
150D 142 42 50 19 20.5 11 25 1.15 40Cr Quench HRC36-44° 75.6 420
MG20 200 70 50 27 29 17 35 3.78 40Cr Quench HRC36-44° 144 800
MG20B 200 70 50 27 29 17 30 3.82 40Cr Quench HRC36-44° 140.4 780
MG20C 200 70 50 27 29 17 28 3.85 40Cr Quench HRC36-44° 122.4 680
MS32 200 42 50 20 22 12 25 1.4 40Cr Quench HRC36-44° 75.6 420
MS55 200 80 70 35 38 25 28 4.36 40Cr Quench HRC36-44° 138.6 770
3006 200 65 70 30 33 24 32 3.6 40Cr Quench HRC36-44° 160.2 890
MS63 250 70 80 30 33 20 32 4.93 40Cr Quench HRC36-44° 147.6 820
S16 100 30 27 15 16 8 14 0.3 40Cr Quench HRC36-44° 16 88
S20 125 34 33 17 18 8 17 0.37 40Cr Quench HRC36-44° 19.4 108
S25 160 48 39 23 25 13 20 1.28 40Cr Quench HRC36-44° 55.8 310
S30 142 46 49 22 23.5 14 25 1.3 40Cr Quench HRC36-44° 91.8 510
Z16 100 40 35 18 20 12 17 0.4 40Cr Quench HRC36-44° 32.4 180
Z20 125 50 46 24 26 15 20 0.67 40Cr Quench HRC36-44° 59.4 330
Z20D 125 52 60 24 26 16 26 1.15 40Cr Quench HRC36-44° 82.8 460
Z25 160 58 55 28 30 18 25 2.25 40Cr Quench HRC36-44° 82.8 460
Z25D 160 66 64 29 31 22 28 2.6 40Cr Quench HRC36-44° 120.6 670
Z30 142 64 50 29 30.5 18 25 1.8 40Cr Quench HRC36-44° 111.6 620
Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly
Surface Treatment: Polishing
Structure: Combined Chain
Material: Alloy
Type: Cranked Link Chain

###

Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Dimension Weight (Kg) Material Hardness Working Load (KN) Limit Load (KN)
P T C S F R D
10160B 101.6 24 36 13 14 6 14 0.32 20CrMnTi Surface HRC56-64°    
Depth 0.6-1.2mm
18 100
10160 101.6 30 36 13 14.5 9 14 0.36 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 21.6 120
14218 142 42 50 19 20.5 11 25 1.15 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 48.6 270
14226 142 62 50 28 30 15 25 1.75 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 61.2 340
20028 200 66 60 30 32 18 30 2.8 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 72 400
26014 260 70 75 31 33 20 34 5.2 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 135 750
142N 142 43 50 19 22 12.5 25 1.2 40Cr Quench HRC36-44° 75.6 420
150D 142 42 50 19 20.5 11 25 1.15 40Cr Quench HRC36-44° 75.6 420
MG20 200 70 50 27 29 17 35 3.78 40Cr Quench HRC36-44° 144 800
MG20B 200 70 50 27 29 17 30 3.82 40Cr Quench HRC36-44° 140.4 780
MG20C 200 70 50 27 29 17 28 3.85 40Cr Quench HRC36-44° 122.4 680
MS32 200 42 50 20 22 12 25 1.4 40Cr Quench HRC36-44° 75.6 420
MS55 200 80 70 35 38 25 28 4.36 40Cr Quench HRC36-44° 138.6 770
3006 200 65 70 30 33 24 32 3.6 40Cr Quench HRC36-44° 160.2 890
MS63 250 70 80 30 33 20 32 4.93 40Cr Quench HRC36-44° 147.6 820
S16 100 30 27 15 16 8 14 0.3 40Cr Quench HRC36-44° 16 88
S20 125 34 33 17 18 8 17 0.37 40Cr Quench HRC36-44° 19.4 108
S25 160 48 39 23 25 13 20 1.28 40Cr Quench HRC36-44° 55.8 310
S30 142 46 49 22 23.5 14 25 1.3 40Cr Quench HRC36-44° 91.8 510
Z16 100 40 35 18 20 12 17 0.4 40Cr Quench HRC36-44° 32.4 180
Z20 125 50 46 24 26 15 20 0.67 40Cr Quench HRC36-44° 59.4 330
Z20D 125 52 60 24 26 16 26 1.15 40Cr Quench HRC36-44° 82.8 460
Z25 160 58 55 28 30 18 25 2.25 40Cr Quench HRC36-44° 82.8 460
Z25D 160 66 64 29 31 22 28 2.6 40Cr Quench HRC36-44° 120.6 670
Z30 142 64 50 29 30.5 18 25 1.8 40Cr Quench HRC36-44° 111.6 620

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.
chain

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.
chain

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China Forged Industry Steel Forging Chain and Scraper Forged Drag Steel Chain Standard Carbon Steel Chain with Machinery Parts and Conveyor Roller Bush     double chainChina Forged Industry Steel Forging Chain and Scraper Forged Drag Steel Chain Standard Carbon Steel Chain with Machinery Parts and Conveyor Roller Bush     double chain
editor by czh 2022-12-31

Tags: bush bush | bush chain | bush roller chain | carbon bush | carbon steel roller chain | chain | chain and conveyor | chain bush | chain conveyor | chain conveyor chain | chain conveyor conveyor | chain conveyor parts | chain conveyor roller | Chain Drag Conveyor | chain roller | chain roller chain | chain roller conveyor | chain scraper conveyor | china bush roller chain | china chain | china chain conveyor | china chain roller conveyor | china chain scraper conveyor | china conveyor chain | china conveyor drag chain | china conveyor roller chain | china double roller chain | china drag chain conveyor | china machinery | china roller chain | china roller chain conveyor | china roller conveyor chain | china scraper chain conveyor | china steel conveyor chain | conveyor chain | conveyor chain parts | conveyor chain roller | Conveyor Drag Chain | conveyor roller chain | conveyor roller scraper chain | double chain conveyor | double chain roller conveyor | double conveyor chain | double drag chain conveyor | double roller chain | drag chain | Drag Chain Conveyor | drag chain conveyor chain | drag chain conveyor parts | drag chain scraper conveyor | Drag Conveyor Chain | forged conveyor chain | forged drag conveyor chain | forging scraper chain | industry roller chain | machinery | machinery china | machinery machinery | machinery parts | parts bush | roller chain | roller chain chain | roller chain conveyor | roller chain conveyor chain | roller chain conveyor parts | roller chain industry | roller chain parts | roller chain standard | roller conveyor chain | roller drag chain | roller steel chain | roller with chain | scraper chain conveyor | scraper chain roller conveyor | scraper conveyor chain | standard chain | standard conveyor chain | Standard Roller Chain | steel chain | steel chain conveyor | steel conveyor chain | steel conveyor chain roller | steel industry conveyor chain | steel roller chain | steel roller conveyor chain

gear chain

As one of leading gear chain manufacturers, suppliers and exporters of mechanical products, We offer gear chain and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of gear chain

Recent Posts