Product Description
China Industrial ASA DIN Standard 16B Roller Chain Sprocket Wheel Sprockets and Chains Duple
MIGHTY manufacture different types of roller chain sprockets as follows:
European Standard: 03, 04, 05B, 06B, 081, 083, 084, 085, 08B, 10B, 12B, 16B, 20B, 24B, 28B, 32B, 40B;
American Standard: ASA 25, ASA 35, ASA 40, ASA 50, ASA 60, ASA 80, ASA 100, ASA 120, ASA 140, ASA 160, 04C, 06C, 08A, 10A, 12A, 16A, 20A, 24A, 28A, 32A, 40A, 41A, 48A, 50A;
Pitch (mm): 5, 6, 6.35, 8, 9.525, 12.7, 15.875, 19.05, 25.4, 31.75, 38.1, 44.45, 50.8;
Pitch (inch): 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, 1 1/4″, 1 1/2″, 1 3/4″, 2″.
Bore Type: standard bore, bore for set screw, bearing, keyway, taper bush.
Material: steel, stainless steel, cast iron; Surface Finish: phosphate, black oxide, zinc plate, paint, passivate, etc.
OUR SERVICE:
1) Competitive price and good quality
2) Used for transmission systems.
3) Excellent performance, long using life
4) Could be developed according to your drawings or data sheet
5) Pakaging:follow the customers’ requirements or as our usual package
6) Brand name: per every customer’s requirement.
7) Flexible minimum order quantity
8) Sample can be supplied
MAIN PRODUCTS:
1) Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate;
2) Forging, Casting, Stampling Part;
3) V Belt Pulley and Taper Lock Bush; Sprocket, Idler and Plate Wheel;Spur Gear, Bevel Gear, Rack;
4) Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.;
5) Shaft Coupling:including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling, Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint;
6) Shaft Collars: including Setscrew Type, Single Split and Double Splits;
7) Timing Belt: including Rubber and PU timing belts for industrial;
8) Other customized Machining Parts according to drawings (OEM).
Company Information
ZheJiang Mighty Machinery Co., Ltd. specializes in manufacturing Mechanical Power Transmission Products.
We Mighty is the division/branch of SCMC Group, which is a wholly state-owned company, established in 1980.
About Mighty:
-3 manufacturing factories, we have 5 technical staff, our FTY have strong capacity for design and process design, and more than
70 workers and double shift eveyday.
-Large quality of various material purchase and stock in warhouse which ensure the low cost for the material and production in
time.
-Strick quality control are apply in the whole prodution. we have incoming inspection,process inspection and final production
inspection which can ensure the perfect of the goods quality.
-14 years of machining experience. Long time cooperate with the Global Buyer, make us easy to understand the csutomer and handle the export.
MIGHTY’s products are mainly exported to Europe, America and the Middle East market. With the top-ranking management, professional technical support and abundant export experience, MIGHTY has established lasting and stable business partnership with many world famous companies and has got good reputation from CHINAMFG customers in international sales.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=10000USD, 30% T/T in advance ,balance before shippment.
We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit.To supply customers excellent quality products with good price and punctual delivery time is our responsibility.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Motorcycle, Agricultural Machinery |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Forging/Casting |
| Toothed Portion Shape: | Curved Gear |
| Material: | 40mn |
| Samples: |
US$ 0.5/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do you calculate the required horsepower for a gear chain drive?
To calculate the required horsepower for a gear chain drive, you need to consider several factors:
1. Speed of the Drive:
– Determine the desired speed of the gear chain drive in revolutions per minute (RPM).
2. Torque Requirement:
– Calculate the torque required by the load or driven equipment. Torque is typically given in pound-feet (lb-ft) or Newton-meters (Nm).
3. Efficiency of the Drive:
– Determine the efficiency of the gear chain drive system. This is usually expressed as a decimal value ranging from 0 to 1.
4. Conversion Factor:
– Determine the appropriate conversion factor to convert the torque units to pound-feet per minute (lb-ft/min) or Newton-meters per minute (Nm/min).
Once you have these values, you can use the following formula to calculate the required horsepower:
Horsepower = (Torque x RPM) / (5252 x Efficiency)
Make sure to use consistent units throughout the calculation.
It is important to note that this calculation provides an estimate of the required horsepower. Actual operating conditions, such as friction, load variations, and other factors, may affect the actual horsepower requirements. Consulting with a qualified engineer or using manufacturer-provided data is recommended for accurate and specific calculations.
What are the noise levels associated with a gear chain?
The noise levels associated with a gear chain can vary depending on several factors. Here are some considerations:
1. Design and Quality: The design and quality of the gear chain play a significant role in determining the noise levels. Well-designed gear chains with proper tooth profiles and precise manufacturing techniques tend to generate less noise.
2. Lubrication: Insufficient or improper lubrication can lead to increased friction and noise in the gear chain. Adequate lubrication helps reduce noise by minimizing metal-to-metal contact and ensuring smooth operation.
3. Load and Speed: Higher loads and speeds can increase the noise levels in a gear chain. The impact of teeth engagement and meshing forces can produce sound, especially under heavy operating conditions.
4. Misalignment and Wear: Misalignment or excessive wear in the gear chain can result in increased noise due to uneven tooth engagement and irregular motion.
5. Surrounding Environment: The noise generated by a gear chain can also be influenced by the surrounding environment. Factors such as reflective surfaces, structural vibrations, and acoustics of the workspace can impact the perceived noise levels.
To reduce the noise levels associated with a gear chain, several measures can be taken:
– Ensure proper lubrication and maintenance of the gear chain to minimize friction and wear.
– Use high-quality gear chains with precise tooth profiles and smooth operation.
– Optimize the operating conditions, including load, speed, and alignment.
– Implement noise reduction measures in the surrounding environment, such as sound-absorbing materials or enclosures.
It’s important to note that while efforts can be made to reduce noise, some level of sound may still be present in gear chain systems. Therefore, it’s recommended to assess the specific noise requirements and consider additional noise mitigation strategies if necessary.
How does a gear chain transmit power and motion?
A gear chain is a mechanical device that transmits power and motion from one rotating shaft to another. It consists of two or more gears connected by a chain, which engages with the teeth of the gears. When one gear is rotated, it transfers the rotational motion and torque to the other gears in the chain, resulting in the transmission of power and motion.
The teeth on the gears and the links of the chain are designed to mesh together, creating a positive engagement. As the driving gear rotates, its teeth push against the chain, causing it to move and rotate the driven gear. This transfer of motion is continuous as long as the driving gear continues to rotate.
The gear chain’s ability to transmit power and motion effectively is based on the principle of gear ratios. The ratio of the number of teeth on the driving gear to the number of teeth on the driven gear determines the speed and torque relationship between them. By selecting gears with different tooth counts, it is possible to achieve specific speed reductions or increases, as well as torque amplification or reduction.
In addition to transmitting power, gear chains can also provide speed control and direction reversal by incorporating different gear sizes or adding additional gears in the chain. This allows for versatile motion control in various applications.
Overall, gear chains are reliable and efficient mechanisms for transmitting power and motion in a wide range of mechanical systems, including automotive transmissions, industrial machinery, and power transmission equipment.
editor by CX 2024-05-07